Aus Post Shipping isnt changing shipping charge

  • Posts: 4
  • Thank you received: 0
13 years 8 months ago #10981

Hello,

I have just added a second product to my store with different dimensions and weight to the first product and i have noticed that the calculated shipping cost does not change. Even if i change the shipping address of my test account the price of shipping does not change.

I am currently using HikaShop 1.4.7 and Joomla 1.6.1

Any help would be appreciated.



Thanks,

Ryan

Please Log in or Create an account to join the conversation.

  • Posts: 82867
  • Thank you received: 13374
  • MODERATOR
13 years 8 months ago #10986

It's working on our end. Could you give the URL of your website so that we can check it out ?

Please Log in or Create an account to join the conversation.

  • Posts: 4
  • Thank you received: 0
13 years 8 months ago #10995

Sure thing.

The url is www.acballast.com

It may well be a setting that i have missed, but i have been through a few times and cannot find what i am missing.

Thank you for the prompt reply.


Ryan

Please Log in or Create an account to join the conversation.

  • Posts: 82867
  • Thank you received: 13374
  • MODERATOR
13 years 8 months ago #11002

What weight did you set for your two products and what do you have in the weight unit option of the hikashop configuration ?

Please Log in or Create an account to join the conversation.

  • Posts: 4
  • Thank you received: 0
13 years 8 months ago #11061

When you say the weight unit, do you mean the weight symbols under System -> Main? That is set to kg,g

For the products it is as follows:

IGLOO Down Light Cover (Single Cover)
Weight: 400.000g
Length: 210.000mm
Width: 120.000mm
Height: 110.000mm

IGLOO Down Light Cover (Box 24)
Weight: 6260.000g
Length: 430.000mm
Width: 395.000mm
Height: 410.000mm

Thank you.

Please Log in or Create an account to join the conversation.

  • Posts: 82867
  • Thank you received: 13374
  • MODERATOR
13 years 8 months ago #11063

That seems ok. Could you give us an FTP access to your website so that we can put traces in it and check out the problem ?

Please Log in or Create an account to join the conversation.

  • Posts: 4
  • Thank you received: 0
13 years 8 months ago #11065

Sure. Is there a way to send a personal message or email address i could send the details to?

Also i can make you a user for the joomla back end if you need it.

Last edit: 13 years 8 months ago by acballast.

Please Log in or Create an account to join the conversation.

  • Posts: 82867
  • Thank you received: 13374
  • MODERATOR
13 years 8 months ago #11067

That would be great. You can use our contact form: www.hikashop.com/en/support/contact-us.html

Please Log in or Create an account to join the conversation.

  • Posts: 82867
  • Thank you received: 13374
  • MODERATOR
13 years 8 months ago #11214

Hi,

The problem was that you used the dimension unit mm for your products but the main unit is m in your config (the first one). HikaShop always convert all the dimensions into the main unit before any calculus (so that everything is in the same unit). However, that resulted in your dimensions being considered as 0 because the numbers were too small.
I just changed the main unit to mm instead of m and it seems that the problem is resolved.

Please Log in or Create an account to join the conversation.

Time to create page: 0.053 seconds
Powered by Kunena Forum